Glass bricks are born in response to some special needs, and they are not quite the same as the bricks we commonly see every day. Therefore, glass brick construction also has a unique set of construction techniques. Want to know the specific process of glass brick construction? Want to know the construction points and fixing method of glass bricks? Don't worry, the editor has already prepared for you, let's take a look together.

1、The glass bricks should be built on the foundation reinforced with two f6～f8 steel bars. The base height should not be greater than 150mm, and the width should be greater than the thickness of the glass brick by more than 20mm. Metal profiles should be used on the top and both ends of the glass brick partition wall, and the width of the guillotine should be greater than the thickness of the brick by more than 10-18mm. When the length or height of the partition is greater than 1500mm, set one steel bar every two layers in the vertical direction (when the length and height exceed 1500mm, set two steel bars)

2、Set a steel bar every three vertical joints in the horizontal direction. Reinforcement extending into the slot is not less than 35mm. The height of the glass brick reinforced with steel bars shall not exceed 4m. At both ends of the glass partition wall and the two wings of the metal profile, there should be a sliding joint with a width of not less than 4mm, and the joint is filled with linoleum

3、Expansion joints with a width of not less than 10mm should be left on the glass partition plate and the ventral surface of the profile to avoid damage to the glass brick partition wall. The top layer of glass bricks should extend into the top metal profile slot by 10~25mm to prevent the glass bricks from being crushed by rigid extrusion. The joint between glass bricks shall not be less than 10mm and not more than 30mm. The joints of glass brick and profile, and profile and building should be sealed with elastic sealant.

Glass brick construction technology-glass fixing method

（1）Drill holes in the glass and fix the glass on the wooden frame and lining board with chrome-plated screws and copper screws.

（2） Press the glass with hardwood, plastic, metal, etc.

（3） Use epoxy to glue the glass to the liner.